'Checktite' is a swing check valve employing a three-piece construction similar to that used in ball valve design. The valve is available in carbon steel or stainless steel with  PTFE, Viton_® or metal to metal seats. Sizes range from DN8 to DN50 reduced bore and DN8 to DN40 full bore.

The straight-through flow, compact design and ease of servicing makes the 'Checktite' the natural choice for many applications. It is particularly suitable for hydrocarbon and chemical process lines.

• Three piece construction makes installation quick and simple.

• Valve body swings away for ease of maintenance or cleaning.

• Wide range of end connectors. (Screwed or weld)

• Exceptionally low cracking pressure and pressure drop.

• Available with virgin PTFE, Viton_® and metal to metal seating.

• Bubble tight shut off (0.7bar.g Viton_®, 6.9bar.g PTFE)

• Optional clack springs available for vertical installations and critical water hammer conditions.

• BS EN 10204:2004 (3.1.b) certification available.

If you require any further information on any of our products you may send a request to us by e-mail or contact us direct at the address noted below.